Send Email
Send SMS
Search
Jet India
Jet India


Motorised Rolling Shutters

Leading Manufacturer of rolling shutter motor, sectional door opener, motorised rolling shutters, automatic rolling shutters, rolling shutters and security shutters from Mumbai.

Rolling Shutter Motor

REQUEST CALLBACK

Rolling Shutter Motor
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Voltage/Hz220V/50Hz
TypeAutomatic Door Operators
MaterialMetal
Power370W

Clear Opening dimension (w) -- x (h) -- - std. dimension or non. std. dimension


Opening Direction - Vertical - from bottom to Top


Mounting Location area - Optional = Inside area / Outside area

Mounting Surface

  • Side Brackets: Optional = On Concrete /Steel & Side
  • Guides : Optional = On Concrete/Steel / Masonry

Opening/Closing Speed - 0.1 m/sec

Wind Resistance - 90 Km/hrs.

Door Material –

  • Curtain material - Optional = MS / GI / SS / AL
  • Curtain Panel - The panel made of 1.0mm thick CRCA steel
  • Curtain panel size - 75mm wide
  • Curtain Profile- Optional = Corrugation / Flat / Ribbed
  • Slat Thickness - 0.9 mm to 1.2 mm (As per IS 6248)
  • Bottom Profile - M. S. Plate 100 mm x 2.5 mm thick with angle stiffener (Optional - Rubber Bottom Seal)
  • Side Guide Profile - M.S." U" Shaped profile 65 mm -200 mm x 3 mm thick (as per the opening width dimension)
  • Roller Shaft - MS Plate 3 mm to 10 mm thick , as per the opening dimension
  • Hood Cover - Made of GI Sheet Thickness 0.8 mm with 25x25x3mm angle stiffener

Surface finish –

  • Painting - 2 Coats (each coat of 35 microns DFT) of EPOXY polyamide based enamel finish of approved color and make over a Coat (each one coat 25 microns DFT) of EPOXY polyamide based red oxide zinc phosphate primer
  • Options Available - Perforation in Slat Profile / Rolling Grill

Automation –

  • Control Type - Optional = Dead man / Pulse Control
  • Drive Unit & Mounting Type –
  1. Electric Motor (Imported German Make) (Single Phase/Three Phase) - Direct Mounting on Shaft
  2. Electric Motor (Imported China make) (single phase / three phase) - Indirect Mounting - Sprocket chain arrangement
  • Emergency Operation - Option = Manual Hand Driven / Chain Wheel Drive
  • Operating Switch
  1. Push Button from inside / or do you need Outside also
  2. Push Button / Key Switch From Outside
  • Integration optional – need to interlock or integrate with other door or machine or Equipment
  • Accessories –
  1. Flashing Light / Door line Safety Photocell
  2. Remote Control with receiver
  • Installation Constraint any - Need to be check = space requirements + substructure + Mounting access + Access in the event of power cut

 

 

** Option = need to select or specify your requirement by choosing Option, so clear communication will happen between us.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Sectional Door Opener

REQUEST CALLBACK

Sectional Door Opener
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Aluminum Sheet 0.5mm.
Surface Treatment Polished, galvanised
thickness 42 mm
High sections600mm

The work covered by this section comprises furnishing all lab our, equipment, appliance and materials and performing all operations in connection with sectional over head doors.

REQUIREMENTS OF REGULATORY AGENCIES - All work shall be in accordance with the requirements of the authorities having jurisdiction and all applicable codes, rules and regulations, and ordinances.

Manufacturers –

  • Manufacturers

1. Products and manufacturers specified hereinafter are specified for the purpose of establishing minimum quality standards and are based on CRAWFORD model 542 Aluminium

2. Products equal in quality to or better than those specified, may be acceptable subject to the Engineers approval

  • Features - The door shall be designed in such a way that it doesn’t consist of any protruding parts affecting personal safety in site.

Door Leaf –

The door leaf consists of process laminated, 42mm thick, 600mm high sections, Insulated by means of CFC-free polyurethane. The specific height of the Door is achieved by trimming the top section.(mixing up of different height sections not permitted) The sandwich panel has a micro rilled design of Aluminum sheet material, which is combined with a glossy finish to ensure a modern and attractive appearance. The door has side, bottom top and section joint seals. The door section consists of the following layers (from inside to outside): primer, Aluminum, primer and polyester coating.(Steel skin for sandwich panel is not acceptable)

  • Exterior Pre-painted Polyester;

1. Embossed (non-embossed, not possible)

2. Polyester 203 or shop painted in synthetic paint 200um in gloss 60+/.2 RAL 1016(DIN 67530).

3. Primer 5um

4. Aluminum Sheet 0.5mm.

  • Interior Natural Aluminium;

1. -Embossed (non-embossed, not possible)
Aluminium sheet 0.5mm



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Motorised Rolling Shutters

REQUEST CALLBACK

Motorised Rolling Shutters
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Clear Opening dimension (w) -- x (h) -- - std. dimension or non. std. dimension

Opening Direction - Vertical - from bottom to Top

Mounting Location area - Optional = Inside area / Outside area

Mounting Surface

  • Side Brackets: Optional = On Concrete /Steel & Side
  • Guides : Optional = On Concrete/Steel / Masonry

Opening/Closing Speed - 0.1 m/sec

Wind Resistance - 90 Km/hrs.

Door Material –

  • Curtain material - Optional = MS / GI / SS / AL
  • Curtain Panel - The panel made of 1.0mm thick CRCA steel
  • Curtain panel size - 75mm wide
  • Curtain Profile- Optional = Corrugation / Flat / Ribbed
  • Slat Thickness - 0.9 mm to 1.2 mm (As per IS 6248)
  • Bottom Profile - M. S. Plate 100 mm x 2.5 mm thick with angle stiffener (Optional - Rubber Bottom Seal)
  • Side Guide Profile - M.S." U" Shaped profile 65 mm -200 mm x 3 mm thick (as per the opening width dimension)
  • Roller Shaft - MS Plate 3 mm to 10 mm thick , as per the opening dimension
  • Hood Cover - Made of GI Sheet Thickness 0.8 mm with 25x25x3mm angle stiffener

Surface finish –

  • Painting - 2 Coats (each coat of 35 microns DFT) of EPOXY polyamide based enamel finish of approved color and make over a Coat (each one coat 25 microns DFT) of EPOXY polyamide based red oxide zinc phosphate primer
  • Options Available - Perforation in Slat Profile / Rolling Grill

Automation –

  • Control Type - Optional = Dead man / Pulse Control
  • Drive Unit & Mounting Type –

1. Electric Motor (Imported German Make) (Single Phase/Three Phase) - Direct Mounting on Shaft

2. Electric Motor (Imported China make) (single phase / three phase) - Indirect Mounting - Sprocket chain arrangement

  • Emergency Operation - Option = Manual Hand Driven / Chain Wheel Drive


Additional Information:

  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Automatic Rolling Shutters

REQUEST CALLBACK

Automatic Rolling Shutters
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Double wall Motorized Rolling Shutter

  • Clear Opening dimension (w) -- x (h) -- - std. dimension or non. std. dimension
  • Opening Direction - Vertical - from bottom to Top
  • Mounting Location area - Only Inside area

Mounting Surface –

  • Side Brackets: Optional = On Concrete / Steel & Side
  • Guides : Optional = On Concrete/Steel / Masonry

Opening/Closing Speed - 0.1 m/sec

Wind Resistance - 120 Km/hr

Door material –

  • Slats material - insulated pre coated Galvanized steel ( Polyurethane foam) 
  • Slat size - 95mm x 19mm with PU filled inside
  • Curtain Profile – Corrugation
  • Slat ( made in Option) - Optional - German slats / China slats
  • Bottom Profile - 125mm x 15mm with extra angle support. (Optional - Rubber Bottom Seal)
  • Side Guide Profile - M.S." U" Shaped profile 125 x 40mm x 3 mm thick (as per the opening width dimension)
  • Roller Shaft - M.S. Tubular Pipe with Flange & machined shaft at the ends Pipe Dia -100 to 300 mm as per w x h
  • Side Brackets -MS Plate 3 mm to 10 mm thick , as per the opening dimension
  • Hood Cover - Made of GI Sheet Thickness 0.8 mm with 25x25x3mm angle stiffener

 

Surface finish –

  • Painting - Powder coated – Off white color
  • Vision Windows - With Vision Window / without Vision Window

 



Additional Information:

  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Rolling Shutters

REQUEST CALLBACK

Rolling Shutters
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Double wall Motorized Rolling Shutter

  • Clear Opening dimension (w) -- x (h) -- - std. dimension or non. std. dimension
  • Opening Direction - Vertical - from bottom to Top
  • Mounting Location area - Only Inside area

Automation

  • Control Type - Optional = Dead man / Pulse Control
  • Drive Unit & Mounting Type –

1. Electric Motor (Imported German Make) (Single Phase/Three Phase) - Direct Mounting on Shaft

2. Electric Motor (Imported China make) (single phase / three phase) - Indirect Mounting - Sprocket chain arrangement

  • Emergency Operation - Option = Manual Hand Driven / Chain Wheel Drive 
  • Operating Mode-  

1. Option = Push Button from inside / or do you need Outside also 

2. Option = Push Button / Key Switch From Outside 

  • Integration optional - Option = need to interlock or integrate with other door or machine or Equipment

Accessories - Option = Flashing Light / Safety Photocell / Remote Control

Installation Constraint any - Need to be check = Space requirements + sub structure scope of work + Mounting access + Access in the event of power cut + clear opening dimensions

 Option = need to select or specify your requirement by choosing Option, so clear communication will happen between us.



Additional Information:

  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

Security Shutters

REQUEST CALLBACK

Security Shutters
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Motorized Rolling Sutter

Clear Opening dimension (w) -- x (h) -- - std. dimension or non. std. dimension

Opening Direction - Vertical - from bottom to Top

Mounting Location area - Optional = Inside area / Outside area

Mounting Surface

  • Side Brackets: Optional = On Concrete /Steel & Side
  • Guides : Optional = On Concrete/Steel / Masonry

Opening/Closing Speed - 0.1 m/sec

Wind Resistance - 90 Km/hrs.

Door Material –

  • Curtain material - Optional = MS / GI / SS / AL
  • Curtain Panel - The panel made of 1.0mm thick CRCA steel
  • Curtain panel size - 75mm wide
  • Curtain Profile- Optional = Corrugation / Flat / Ribbed
  • Slat Thickness - 0.9 mm to 1.2 mm (As per IS 6248)
  • Bottom Profile - M. S. Plate 100 mm x 2.5 mm thick with angle stiffener (Optional - Rubber Bottom Seal)
  • Side Guide Profile - M.S." U" Shaped profile 65 mm -200 mm x 3 mm thick (as per the opening width dimension)
  • Roller Shaft - MS Plate 3 mm to 10 mm thick , as per the opening dimension
  • Hood Cover - Made of GI Sheet Thickness 0.8 mm with 25x25x3mm angle stiffener

Surface finish –

  • Painting - 2 Coats (each coat of 35 microns DFT) of EPOXY polyamide based enamel finish of approved color and make over a Coat (each one coat 25 microns DFT) of EPOXY polyamide based red oxide zinc phosphate primer
  • Options Available - Perforation in Slat Profile / Rolling Grill


Additional Information:

  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Jet India
Ram Choudhary (Vice President)
No. 213, Allied Industrial Estate, Ram Punjwani Marg Off M. M. C. Road, Mahim,
Mumbai - 400016, Maharashtra, India
Call Us: 
Call Response Rate: 76%
Share Us :
F G T L



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

© Jet India. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Jet India